Trend PRT/L Professional Router Table 115V

Trend PRT/L Professional Router Table 115V

Professional portable router table with aluminium table surface and back fence for floor & bench mounting use. Back fence squareness adjustment for absolute accuracy. T11E quick release fixing holes for fixing T11 fixing kit. Bench leg level adjustment when mounted on a bench. 20mm hole for the T11 Quick Raiser adjuster handle.
Floor or bench standing with removable legs and adjustment for uneven floors.
Extruded 8mm thick aluminium alloy table top with minimal loss of cutter depth. Cutter aperture of 90mm allows use of the largest router cutters available.
Cast back fence with extruded adjustable alloy cheeks and ‘T’ slots.
Made to EN standards, with back fence accuracy of 0.5 degree & table flatness of 0.5mm.
With a suitable size and weight enabling easy re-positioning around the workshop & transportation for on-site use.
Router, fine height adjuster and spelch block not included.
Removable centre plate of table will need to be re-drilled for other makes and models of medium & heavy duty routers.
Router not included.
Ideal for site use.
115v routers over 1850W (including T10 and T11) cannot be used with no volt release switch router tables.

Specification-

Rating=Professional/Trade
Table size=650 mm x 550 mm
Bench height=350 mm
Height with legs=830 mm
Router cutter aperture=90 mm
Insert ring size=20 mm, 35 mm, 54 mm, 68 mm
Back fence height=110 mm
Dust spout aperture=57 mm
Weight=25kg
Voltage=115v
Plug=16amp
Max. load=1850w @ 13.5amp
Supplied with 16A BS4343 plug and socket
End of life=See below for Environmental Policy link
Not intended for continuous production or production line use.
115v routers over 1850W (including T10 and T11) cannot be used with no volt release switch router tables.