Makita HM1317CB 28.6mm Hex Demolition Hammer With AVT 110v

Makita HM1317CB 28.6mm Hex Demolition Hammer with AVT 110v

Makita’s hard-hitting HM1317CB Demolition Breaker Hammer is engineered for heavy chipping, demolition and breaking applications, but with less vibration for increased user comfort. The HM1317CB is equipped with Anti-Vibration Technology (AVT), an internal counterbalance system that is engineered into the tool for more effective vibration reduction. It is an ideal solution for heavy structural demolition like breaking up driveways and sidewalks, as well as for landscape and trench-work, asphalt removal, driving ground rods, and more.

The HM1317CB has a 14 AMP motor that delivers 730-1,450 BPM and 26.5 joules of impact energy. It features Makita’s electronic controller so users will benefit from the soft start, as well as a variable speed control dial, an L.E.D. service light that notifies users before brushes need to be replaced, and constant speed control that automatically applies additional power to the motor to maintain speed under load for the most challenging jobs. For added convenience, the HM1317CB has a 5 metre cord and accepts the popular 28.6mm Hex bit type.

FEATURES

Powerful 14 AMP motor delivers 26.5 Joules of impact energy to handle the most demanding applications
L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
Variable speed control dial enables user to match the speed to the application for greater versatility
L.E.D. power light indicates switch failure or cord damage
Rubberised ergonomic soft grip provides more comfort
Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
Soft start suppresses start-up reaction for more precision and better accuracy
Extended life brushes are longer for more work between service intervals and less downtime
Automatic brush cut-off protects commutator from damage for longer tool life
“No hammering when idling” function helps increase tool life
Easy-to-operate slide switch increases productivity and allows for continuous use
Side handle swivels 360° for greater control
Makita Motor Advantage engineered with field core interlocking steel lamination, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
Durable blow-moulded rolling tool case for safe storage and easy transportation

SPECIFICATION

Blows per minute: 730-1450 bpm
Input wattage: 1510 w
Drive shank: Hex 28.6mm
Net weight: 19 kg
Impact energy (High): 26.5 J
Impact energy (Low): 24.0 J

NOISE & VIBRATION

Noise sound pressure: 81 dB(A)
Noise sound power: 101 dB(A)
Noise K factor: 2.4 dB(A)
Vibration: Chiselling: 8.5 m/sec²
Vibration K factor: 1.5 m/sec²

Only Available In 110v